|
|
5/16 X 4 INCH ALL AMERICAN PIN DRIVE EXPANSION ANCHOR
|
|
Prescott Supply Price: $4.15
Item Number: 3AAA5164
Order quantities in the range below to receive Discount(s):
| Quantity | Amount |
| 10 to 24 | $2.91 |
| 25 to 49 | $2.08 |
| 50 to 99 | $1.25 |
| 100 or more | $0.83 |
|
|
|
FEATURES OF PIN DRIVE EXPANSION ANCHORS: |
|
• Visually inspectable after set.
• Easy to Use
• Drill hole same size as anchor
• Insert anchor with nut and washer attached
• Carbon Steel Body with Hardened Setting Pin
• High Pull-Out and Sheer Strength
• Zinc and Dichromate Plated
• Nuts and Washers included
• Thread Length:
1-1/4"
• Maximum Thickness
Fastened: 2-1/2"
• Recommended Embedment Depth: 1-1/8" or more
• Drill Size: 5/16"
|
|
HOW TO INSTALL PIN DRIVE EXPANSION ANCHORS:
|
|
1. Drill hole of sufficient depth using same
diameter
masonry bit as anchor being installed.
|
 |
2. Turn nut on anchor as required.
May be flush with top or turned on fully to provide stud finish. |
 |
|
3. With nut, washer, and set-pin in place, insert anchor into hole. |
 |
4. Using a proper sized hammer, set pin with several sharp
and square strikes on head of pin until pin is flush with top of anchor.
Anchor is now properly set.
5. No need to torque nut to set anchor.
|
 |
|
USES FOR PIN DRIVE EXPANSION ANCHORS:
Outlet Boxes - Conveyor Belt Mounts - Stadium Seats
- Bracing - Steel and Wood Plates
Shelving - Machine Anchoring - Hand and Guard Rails
- Water and Gas Meters - Grain and Storage Bins
Mail Boxes - Light Fixtures - Ornamental Fencing
- Steel Buildings |
|
|
|
|