3/4 X 6 INCH ALL AMERICAN PIN DRIVE EXPANSION ANCHOR

Prescott Supply Price: $17.21

Item Number: 3AAA346

Quantity:

The All American Anchor is visually inspectable after set. When the pin is hammered down to meet the threads, the anchor is fully set. NO GUESSWORK or torque necessary like a Wedge Anchor or Sleeve Anchor.
FEATURES:
Easy to Use Drill hole same size as anchor Insert anchor with nut and washer attached Carbon Steel Body with Hardened Setting Pin High Pull-Out and Sheer Strength Zinc and Dichromate Plated Nuts and Washers included Thread Length: 2" Maximum Thickness Fastened: 3-1/4" Recommended Embedment Depth: 2" or more Drill Size: 3/4"
INSTALLATION PROCEDURE:
1. Drill hole of sufficient depth using same diameter masonry bit as anchor being installed. 2. Turn nut on anchor as required. May be flush with top or turned on fully to provide stud finish. 3. With nut, washer, and set-pin in place, insert anchor into hole. 4. Using a proper sized hammer, set pin with several sharp and square strikes on head of pin until pin is flush with top of anchor. Anchor is now properly set. 5. No need to torque nut to set anchor.
WHERE TO USE ALL AMERICAN ANCHORS? Outlet Boxes - Conveyor Belt Mounts - Stadium Seats - Bracing - Steel and Wood Plates Shelving - Machine Anchoring - Hand and Guard Rails - Water and Gas Meters - Grain and Storage Bins Mail Boxes - Light Fixtures - Ornamental Fencing - Steel Buildings