1/4 X 4 INCH FLAT HEAD SPLIT DRIVE ANCHORS

1/4 X 3 INCH FLAT HEAD SPLIT DRIVE ANCHORS

Prescott Supply Price: $1.40

Item Number: 3FHSD144

Quantity:

Order quantities in the range below to receive Discount(s):

Quantity	Amount
10 to 24	$0.98
25 to 49	$0.70
50 to 99	$0.42
100 or more	$0.28

Easy to install! A drill and hammer are the only tools needed to install split drives.
Relatively high pull-out strength at a low cost
Works in poured concrete, concrete block, brick and stone
Drill same hole diameter as the anchor diameter
Zinc plated for corrosion resistance
Meets ASTM B-633
Pull Out @ 1-1/8" Embedment (3700 psi concrete): 2000 lbs.
Drill Size: 1/4"

INSTALLATION PROCEDURE:

A safety factor of 4:1, or 25% of ultimate, should be used.
Critical applications (vibratory loads, overhead installations, etc.)
may require a safety factor of as much as 10:1 or more.